3D modeling of part file
3D modeling of Universal Joint – Part 1
Start 2D Sketch
Select the YZ Plane
Sketch as below
Offset
Closes the open section in a straight line.
Extrude the Sketch
Extrude the Sketch up to 60mm
Select the top plane and Start 2D Sketch
2D Sketch on the top plane
Make Extrude Cut with the circle
Select the above slope plane and Sketch
2D Sketch on the plane
Make Extrude Cut with the circle
Fillet the Edge
Fillet
Appearance
Part 1 is Completed, Save the file.